Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Bauer HD 8x56 Binoculars1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Black Barrel Case (83cm Internal)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x ERATAC KeyMod Picatinny Rail. 9 Slots [T4909-0010]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Anschütz Biathlon Harness1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC Two-Piece Picatinny Rings (Nut)1 x Krieghoff "K" Denim Cap - Grey1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Krieghoff "K" Denim Cap - Navy1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x ERATAC KeyMod Picatinny Rail, 3 Slots [T4903-0010]1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa CZ 527 Euro Rail for Quick Release Mount
Manufacturers
Useful Information