Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff Pro Choke Box1 x Black Barrel Case (83cm Internal)2 x Anschütz Biathlon Harness1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC Bubble Level [T0940-0002]1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Schmierfix Grease by Liqui Moly1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Grain Sealer by Trade Secret (50ml)1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Bauer HD 8x42 Binoculars1 x Gerber GDC Zip Blade1 x Krieghoff Sight Bead Blanking Screw1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Krieghoff 2009 Badge (Collectors Badge)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Krieghoff Achievement Badge 100/3001 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]
Manufacturers
Useful Information