Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)

£100.00
20% VAT incl.


  • Model:SLT320
Schultz & Larsen Picatinny Rail
Fits Tikka T3 / T3X / T3 Lite (20 MOA)


Machined out of aluminium and anodised for strength with scratch proof coating. Incredibly strong and rust proof, due to the special hardening process. A very low construction of only 7mm with strengthening bar running centrally on the underside of the rail. This rail is precision made and very high quality, designed to fit the Tikka T3 rifle only.

Clearly indicated which rifle it fits on the top and inclination of MOA on the underneath if applicable. Always mount it with rifle name of the rifle at the back nearest the bolt.

Hole Spacing (from front to rear)
Holes 1-2: 21.9mm
Holes 2-3: 82.2mm
Holes 3-4: 21.9mm

Weight - 45g
Length - 155mm
Base Height (BH) - 7mm
Code Ref: SLT320

The torx screws for fitting are included. For best results use Locktite Thread locker to stop screws vibrating loose. Supplied are 4 screws.

Visit the following Scope Mounting Information for help getting the correct height when mounting your scope.
1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Krieghoff Pro Choke Box1 x Anschütz Biathlon Harness1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Bauer Outdoor 8x21 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x K-80 Stock Weight for Balance System1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]
Manufacturers
Useful Information