Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x VFG Adaptor for VFG Rods (Spare)1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Genuine Sack-Ups - Rifle/Shotgun Sack1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Complete Set for .1771 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Krieghoff "K" Mesh Cap - Black1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Shell Bag2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x ERATAC ACI Bubble Level [T0940-0000]1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff "K" Logo Cap Navy & Red1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff Shooter's Towel - Navy1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Krieghoff "K" Mesh Cap - Grey
Manufacturers
Useful Information