Krieghoff Black Titanium Hanger, Choke Tube Barrels

£195.00
20% VAT incl.

Available Options

  • Model:BTH
The Black Titanium Hanger

Please Note: The Black Titanium Hanger is available to purchase with an estimated 7-10 day delivery time

Black Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the Black Titanium Choke Tubes the difference in handling is noticeable.

Available in sizes #1, #2, #3, #4, #5 #6 and #7 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

A pair of suitably sized pin punches are available in this store.

Weight of Titanium Hanger: 6 g
(Compared to Steel Hanger weight of 12 g)

Height Sizes Available:
#1 = 0,5 mm
#2 = 1,0 mm
#3 = 1,5 mm
#4 = 2,0 mm
#5 = 2,5 mm
#6 = 3,0 mm
#7 = 3,5 mm
#8 = 4,0 mm



We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
Pin Punches (1.4mm/0.9mm)
Pin Punches (1.4mm/0.9mm)
£14.00
20% VAT incl.
1 x K-80 Standard Trigger - Black Titanium1 x Krieghoff K-80 Sport Beanie - Heather Navy1 x Krieghoff Shell Bag1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff "K" Logo Cap Navy & White1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]1 x Jones Gun Nut Kit1 x Ex-Demo K-80 Steel 12b Hanger #81 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Krieghoff "K" Logo Cap Red & White1 x Krieghoff Steel Middle Hanger (For Parcours)1 x K-80 Standard Trigger - Titanium1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Used Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff "K" Mesh Cap - Navy1 x Bear Grylls Sliding Saw by Gerber1 x Gerber Paraframe I Fine Edge Knife1 x Gerber Metolius Pocket Folder1 x Winchester 3" Folding Knife1 x Krieghoff "K" Beanie - Oatmeal1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Krieghoff Front Sight Bead1 x Krieghoff Shooter's Towel - Black1 x K-80 Forward Position Trigger - Steel1 x Krieghoff Small Front Sight Bead1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Gerber New Myth Series Pocket Folder1 x Krieghoff Pro Choke Box1 x Schmierfix Grease by Liqui Moly1 x Krieghoff "K" Logo Cap Navy & Red1 x Chapman Precision Screwdriver Set 9800, 28 Piece (Metric)1 x Krieghoff Shooter's Towel - Navy1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff "K" Beanie - Heather Navy
Manufacturers
Useful Information