Contessa QD Rear Extended Picatinny Rail Mount for Blaser

£342.00
20% VAT incl.


  • Model:SBB03/R
Contessa Rear Extended Picatinny Rail for Blaser
Quick Release (QD) Rail Mount including Rear Picatinny Rail for Blaser


Rail Length: 190mm
Height without Rail (BH): 12.5mm
Height with Rail (BH): 19.5mm
Extends Backwards - 98mm Back past the rear rifle clamp notch
Weight: 282g
Fits Models: R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 1 x Forward Extended Picatinny Rail (EBB02-REAR)
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

This quick release mount is an extended Picatinny Rail, suitable for night vision, allowing greater flexibility in eye relief position. This mount is supplied with a quick release base with ONLY THE REAR EXTENDED RAIL, that extends backwards towards the eye. Simple single release lever and high quality with guaranteed return to zero.

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Rings,
Contessa Quick Release Mount for Blaser with Forward Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Ex-Demo K-80 Steel 12b Hanger #81 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff "K" Mesh Cap - Black1 x Used Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff "K" Mesh Cap - Navy2 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)2 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]2 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)2 x Krieghoff "K" Mesh Cap - Grey1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Krieghoff "K" Denim Cap - Navy1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Black Barrel Case (83cm Internal)2 x Krieghoff Pro Choke Box1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Anschütz Biathlon Harness1 x Bauer HD Series 8x25 Binoculars1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff K-80 Sport Logo Cap Grey & White1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Brass Mid Sight Bead1 x Bear Grylls Paracord Fixed Blade1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Sight Bead Blanking Screw1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Gerber GDC Zip Blade1 x Contessa Picatinny Rail - Tikka T1 / T1X (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 500)1 x WalkStool Comfort 65 (65cm/26in)1 x Gerber New Myth Series Pocket Folder1 x Contessa Picatinny Rail - Sauer 200 (10 MOA)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa Picatinny Rail - Sako 75/85 Long (0 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Silva Dine Duo Kit - Purple/White1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Picatinny Rail Remington 700 S, Steel [..0012]1 x Jones Original Pad Adjuster1 x Jones Thru-the-Pad Adjuster1 x Gerber Paraframe I Fine Edge Knife1 x Gerber Metolius Pocket Folder1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Winchester 3" Folding Knife1 x Krieghoff Trigger & Selector Locking Wrench1 x WalkStool Set of Spare Red Spring1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II
Manufacturers
Useful Information