Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff "K" Denim Cap - Grey1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff 2015 Badge (Collectors Badge)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Krieghoff 2009 Badge (Collectors Badge)1 x Krieghoff Factory Hanger Pin1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Krieghoff "K" Beanie - Heather Navy1 x Krieghoff Stock Removal Wrench1 x Grain Sealer by Trade Secret (50ml)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Gerber Paraframe I Fine Edge Knife1 x Gerber Metolius Pocket Folder1 x Winchester 3" Folding Knife1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x Genuine Sack-Ups - Rifle/Shotgun Sack1 x K-80 Forward Position Trigger - Steel1 x Krieghoff Trigger & Selector Locking Wrench1 x Hi Viz - How to Become a Better Shooter1 x Gerber New Myth Series Pocket Folder1 x Krieghoff Small Front Sight Bead1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Krieghoff Achievement Badge 25 Straight1 x Krieghoff "K" Logo Cap Navy & Red1 x Krieghoff Comb Wrench (T-Handle)1 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff "K" Logo Cap Navy & White1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)
Manufacturers
Useful Information