Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Krieghoff "K" Logo Cap Navy & Red1 x Krieghoff Shooter's Towel - Black1 x Krieghoff Factory Hanger Pin1 x K-80 Forward Position Trigger - Steel1 x Krieghoff "K" Bobble Beanie - Navy3 x Krieghoff "K" Mesh Cap - Grey1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]2 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Black Barrel Case (83cm Internal)1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Schultz & Larsen Professional Bipod by Spartan1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x K-80 Stock Weight for Balance System1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Anschütz Biathlon Harness1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x Krieghoff "K" Denim Cap - Grey1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Achievement Badge 100/3001 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Krieghoff Premium ABS Case (K-80/K-20)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Trigger & Selector Locking Wrench1 x Ex-Demo K-80 Steel 12b Hanger #81 x Used Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff "K" Mesh Cap - Navy1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff "K" Logo Cap Red & White1 x Krieghoff Shell Bag1 x K-80 Forward Position Trigger - Gold Titanium1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff K-80 Sport Logo Cap Grey & White1 x Krieghoff "K" Beanie - Oatmeal1 x Krieghoff Shooter's Towel - Navy1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff Small Front Sight Bead1 x Krieghoff Pro Choke Box1 x Krieghoff "K" Beanie - Slate Grey1 x Krieghoff "K" Beanie - Heather Navy2 x Jones Gun Nut Kit1 x Krieghoff "K" Logo Cap Grey & White1 x Bear Grylls Sliding Saw by Gerber1 x Krieghoff 12b Choke Wrench
Manufacturers
Useful Information