Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)

The Chapman Precision Screwdriver & Midget Ratchet Set
Set Number - #5859
(Metric & SAE)

This Chapman Tool Set comprises of 44 Pieces. Including 40 bits of a combination of Phillips, Metric & SAE Hex, Torx and Slotted bits.

- Great for gunsmiths, firearms, weapons, lanterns, sewing machines & fishing reels
- Our slotted bits have straight parallel sides (not tapered like most screwdrivers) for maximum surface contact with the screws
- Each slotted kit includes a spinner to use on small, delicate screws
- We've received many questions about small firearm screws treated with Loctite. Green Loctite threadlocker is supposed to be used on screws smaller than 1/2" not the commonly used red threadlocker.
- Made, hand assembled & inspected in Durham, CT from USA materials.
- We have Spare Bits Available if you do lose or damage one from your set

The Driver Bits:
- Precision milled to tight tolerances with flat edges, sharp corners & no burrs for snug screw fit
- Machined from USA steel & heat treated with a black oxide rust inhibitor finish
- Bits are engineered to bend/break BEFORE damaging the screw they fit
- Each bit has ear/or ring stops with ball detent to hold the bit securely in our tools
- Bits have knurled ends for finger tightening & are stamped with the part #
- Non-magnetic for use on electronics & PC boards

Contents:
- 12 x Slotted Bits (Blade Width x Thickness)
-- #88 .125" x .023"
-- #89 .160" x .030"
-- #90 .190" x .025"
-- #25 .190" x .037"
-- #26 .230" x .037"
-- #93 .250" x .025"
-- #17 .250" x .023"
-- #95 .328" x .030"
-- #96 .328" x .037"
-- #97 .375" x .025"
-- #98 .375" x .037"
-- #19 .375" x .050"

- 8 x Hex Bits (Metric)
-- #40 1.5mm
-- #41 2.0mm
-- #42 2.5mm
-- #43 3.0mm
-- #44 4.0mm
-- #45 5.0mm
-- #46 6.0mm
-- #48 8.0mm

- 10 x Hex Bits (SAE)
-- #3 0.50"
-- #4 1/16"
-- #5 5/64"
-- #6 3/32"
-- #7 7/64"
-- #8 1/8"
-- #9 9/64"
-- #10 5/32"
-- #12 3/16"
-- #12 7/32"

- 2 x Phillips Bits
-- #P1 #1 Phillips
-- #P2 #2 Phillips

- 7 x Torx (Star) Bits
-- #S6
-- #S8
-- #S10
-- #S15
-- #S20
-- #S25
-- #S30

- 1 x Driver Handle
- 1 x Midget Ratchet Handle
- 1 x Driver/Ratchet Extension
- 1 x Spinner Attachment
- 1 x Plastic Hard Case