Pin Punches (1.4mm/0.9mm)

£14.00
20% VAT incl.

Available Options

  • Model:PUNCHES
Front hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the centre of the hollow cross pin to provide support whilst it is replaced.

The pin punch is used to drive objects using a soft hammer, with care taken not to damage your equipment when using.

You may also require a spare Krieghoff Hanger Pin.

The Pin Punches are Available in:
- Set of 2 (both 1.4mm & 0.9mm) - £11.90
- 1.4mm Only - £5.95
- 0.9mm Only - £5.95



You might also like...

1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Black Barrel Case (83cm Internal)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Krieghoff Shell Bag1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Bear Grylls Ultimate Pack with Multi-Tool1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff "K" Mesh Cap - Navy1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount
Manufacturers
Useful Information