Krieghoff Black Titanium Hanger, Choke Tube Barrels

£195.00
20% VAT incl.

Available Options

  • Model:BTH
The Black Titanium Hanger

Please Note: The Black Titanium Hanger is available to purchase with an estimated 7-10 day delivery time

Black Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the Black Titanium Choke Tubes the difference in handling is noticeable.

Available in sizes #1, #2, #3, #4, #5 #6 and #7 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

A pair of suitably sized pin punches are available in this store.

Weight of Titanium Hanger: 6 g
(Compared to Steel Hanger weight of 12 g)

Height Sizes Available:
#1 = 0,5 mm
#2 = 1,0 mm
#3 = 1,5 mm
#4 = 2,0 mm
#5 = 2,5 mm
#6 = 3,0 mm
#7 = 3,5 mm
#8 = 4,0 mm



We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
Pin Punches (1.4mm/0.9mm)
Pin Punches (1.4mm/0.9mm)
£14.00
20% VAT incl.
1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 (10 MOA)1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff "K" Mesh Cap - Grey1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Bauer Outdoor 10x25 Binoculars1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Black Barrel Case (83cm Internal)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Pro Choke Box1 x K-80 Stock Weight for Balance System1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Bauer Outdoor 8x21 Binoculars1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Denim Cap - Grey1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Anschütz Biathlon Harness1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff K-80 Sport Logo Cap Grey & White1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)
Manufacturers
Useful Information