Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)

£100.00
20% VAT incl.


  • Model:SLT320
Schultz & Larsen Picatinny Rail
Fits Tikka T3 / T3X / T3 Lite (20 MOA)


Machined out of aluminium and anodised for strength with scratch proof coating. Incredibly strong and rust proof, due to the special hardening process. A very low construction of only 7mm with strengthening bar running centrally on the underside of the rail. This rail is precision made and very high quality, designed to fit the Tikka T3 rifle only.

Clearly indicated which rifle it fits on the top and inclination of MOA on the underneath if applicable. Always mount it with rifle name of the rifle at the back nearest the bolt.

Hole Spacing (from front to rear)
Holes 1-2: 21.9mm
Holes 2-3: 82.2mm
Holes 3-4: 21.9mm

Weight - 45g
Length - 155mm
Base Height (BH) - 7mm
Code Ref: SLT320

The torx screws for fitting are included. For best results use Locktite Thread locker to stop screws vibrating loose. Supplied are 4 screws.

Visit the following Scope Mounting Information for help getting the correct height when mounting your scope.
1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Pro Choke Box1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Anschütz Biathlon Harness1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Krieghoff "K" Denim Cap - Grey1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Gerber New Myth Series Pocket Folder1 x Starkie Blue (A.K.A Smurf Poo)1 x Gerber Paraframe I Fine Edge Knife1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Walkstool Steady1 x CR2032 Camelion Lithium Battery1 x Krieghoff Shooter's Towel - Red1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Picatinny Rail - Tikka T1 / T1X (0 MOA)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff Shell Bag1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Denim Cap - Navy
Manufacturers
Useful Information