Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Anschütz Biathlon Harness1 x Bauer Outdoor 10x25 Binoculars1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)2 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]2 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff "K" Mesh Cap - Navy1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x AG3 / 392A Alkaline Batteries (10 Pack)2 x Krieghoff "K" Mesh Cap - Grey2 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]2 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)2 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)2 x Krieghoff Pro Choke Box1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Ex-Demo K-80 Steel 12b Hanger #81 x Krieghoff "K" Mesh Cap - Black1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Used Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x MSA Sordin - Hygiene Kit - Gel Ear Seals1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54 (20 MOA)1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]1 x Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x K-80 Stock Weight for Balance System1 x Krieghoff Sight Bead Blanking Screw1 x Precision Fit Stock Aligner Bracket1 x K-80 Forward Position Trigger - Steel1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Krieghoff E-Clips1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Krieghoff Brass Mid Sight Bead1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x WalkStool Spare Leg Joints1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Bear Grylls Sliding Saw by Gerber1 x Contessa Picatinny Rail - Anschutz 54 (0 MOA)1 x K-80 Standard Trigger - Black Titanium1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Silva Dine Duo Kit - Purple/White1 x Krieghoff Trigger & Selector Locking Wrench1 x Jones Gun Nut Kit1 x Precision Fit Stock Additional Comb
Right-Handed
1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Comb Wrench (T-Handle)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x VFG Adaptor for VFG Rods (Spare)1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Chapman Precision Screwdriver Set 9800, 28 Piece (Metric)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)
Manufacturers
Useful Information