Schultz & Larsen Thunderdome Moderator (Over Barrel)

£210.00
20% VAT incl.


  • Model:SL-TD-OB
Schultz & Larsen | Sound Moderator

HARDCORE SERIES - THUNDERDOME (Over Barrel)


Also See Thunderdome (Muzzle Mounted)


Only Available to Purchase through a Gun Shop or RFD

Silencers and Sound Moderators are classed as a firearm and cannot be supplied mail order. Contact your local dealer for UK ordering. We cannot ship any Schultz & Larsen Sound Moderators outside of the UK. (Please contact Schultz & Larsen directly for ordering outside of the UK)
Call Us on 01978 66 00 01 for ordering details.


The Thunderdome is the moderator for those wanting maximum noise reduction and recoil reduction. This big moderator has the capacity to handle the most powerful loads and is especially recommended for taming the big magnums.

Over Barrel
Length: 225mm
Adds to barrel length: 120mm
Diameter: 54mm
Weight: 523 g

Available in:
6mm (.236” max).
7mm (.275” max).
8mm (.315mm max)
9.5mm (.338mm max)
Maximum barrel diameter: 22mm at 100mm from the muzzle

Thread sizes:
Metric: M14x1 / M15x1 / M17x1 / M18x1
Imperial: 1/2” x 20 UNF / 1/2” x 28 UNEF / 5/8” x 24

An additional baffle module is available as an add on to further increase the noise reduction. The module adds 54mm to the length and around 150g to the weight. If you wish to add or remove modules you will need the pair of C-spanners made by Schultz & Larsen for this purpose. Unusually, for a rifle maker at least, Schultz & Larsen have chosen to design and manufacture their own moderators. In doing so they have set the same standards for performance demanded of their rifles.

Each moderator is made of the highest quality materials and designed to withstand repeated firing with heavy calibres. Every baffle has a stainless steel cone in the centre to ensure longevity – hence the designation for this model range – ‘Schultz & Larsen Hardcore’.

The rear section of the over-barrel models is machined from solid bar and that alone is an impressive piece of engineering.

Maintenance
The moderators require minimal cleaning to prevent rusting. The recommended cleaning method is to run a cleaning rod through the moderator periodically. In theory the carbon left behind from usage actually reduces the noise as it slows the gases flowing through the moderator.

Full Range of Schultz & Larsen Sound Moderators:
- TMD 35 (Muzzle Mounted)
- Ultradome (Over Barrel)
- Superdome (Over Barrel)
- Superdome (Muzzle Mounted)
- Thunderdome (Over Barrel)
- Thunderdome (Muzzle Mounted)
- Ultra Venom (Over Barrel)
- Venom (Over Barrel)
- Venom (Muzzle Mounted)

2 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Krieghoff "K" Denim Cap - Navy1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x K-80 Stock Weight for Balance System1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Anschütz Biathlon Harness1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Bauer HD Series 8x25 Binoculars1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Krieghoff "K" Mesh Cap - Navy1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Krieghoff "K" Mesh Cap - Grey1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Shell Bag1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Krieghoff Sight Bead Blanking Screw1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Used Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff "K" Denim Cap - Grey1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Ex-Demo K-80 Steel 12b Hanger #81 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa Picatinny Rail - Anschutz 54 (20 MOA)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Picatinny Rail - Sako 75/85 Long (0 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)
Manufacturers
Useful Information