Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff "K" Denim Cap - Grey1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Krieghoff "K" Denim Cap - Navy1 x Schultz & Larsen Torx Key for Scope Mounts1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x K-80 Standard Trigger - Black Titanium1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff Shooter's Towel - Navy1 x Bear Grylls Sliding Saw by Gerber1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Premium ABS Case (K-80/K-20)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Bauer Outdoor 8x21 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x Schultz & Larsen Professional Bipod by Spartan1 x K-80 Stock Weight for Balance System1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Krieghoff Pro Choke Box1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Jones Original Pad Adjuster1 x Chapman Precision Screwdriver Set 9800, 28 Piece (Metric)
Manufacturers
Useful Information