Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable

£138.00
20% VAT incl.


  • Model:PH12N/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Short
With 0 MOA
Adjustable to fit various action sizes
Fits Sako Models: 75* / 85

Rail Length - 150mm
Distance between Bases - 66mm - 90mm
Height (BH) - 12.5mm
Weight: - 170g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrenches,
- Fitting Screws all included



Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 66 - 90mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).

Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 66mm and 90mm apart, the rail will be able to fit.

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Sight Bead Blanking Screw1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Krieghoff "K" Mesh Cap - Black1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff "K" Mesh Cap - Navy1 x Ex-Demo K-80 Steel 12b Hanger #81 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]2 x Anschütz Biathlon Harness1 x Krieghoff "K" Denim Cap - Navy2 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Krieghoff Premium ABS Case (K-80/K-20)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Shooter's Towel - Red1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x Krieghoff 12b Choke Wrench1 x Recknagel Bases for 16mm Dovetail - Steyr Classic [48005-0088]1 x Jones Original Pad Adjuster1 x Gerber Metolius Pocket Folder1 x Krieghoff 2009 Badge (Collectors Badge)1 x Krieghoff Steel Middle Hanger (For Parcours)1 x K-80 Stock Weight for Balance System1 x Bauer HD Series 8x25 Binoculars1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Jones Thru-the-Pad Adjuster1 x Gerber Myth Series Field Sharpener1 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x Gerber Octane Multi-Tool Red1 x Krieghoff Stock Removal Wrench1 x Jones Gun Nut Kit1 x Precision Fit Stock Additional Comb
Right-Handed
1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff Small Front Sight Bead1 x EX Demo - Gerber Metolius Pocket Folder1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Sling Swivel Loop - 20mm, M4 Screw [21215-1016]1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Recknagel Stock Shield - Oval Contoured1 x Contessa Picatinny Rail - Sako 75/85 Long (20 MOA)1 x Recknagel QD Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Hi Viz - How to Become a Better Shooter1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 500)
Manufacturers
Useful Information