Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)

£100.00
20% VAT incl.


  • Model:SL6910
Schultz & Larsen Picatinny Rail
Fits Schultz & Larsen Classic DL Rifle (0 MOA)


Machined out of aluminium and anodised for strength with scratch proof coating. Incredibly strong and rust proof, due to the special hardening process. A very low construction of only 7mm with strengthening bar running centrally on the underside of the rail. This rail is precision made and very high quality, designed to fit the S&L Classic DL rifle only.

Clearly indicated which rifle it fits on the top and inclination of MOA on the underneath if applicable. Always mount it with rifle name "Classic" at the back nearest the bolt.

Weight - 45g
Length - 165mm
Base Height (BH) - 7mm
Code Ref: SL6920

Hole Spacing:
Hole 1-2: 22mm
Hole 2-3: 98mm
Hole 3-4: 22mm

The hex screws for fitting are included. For best results use Locktite Thread locker to stop screws vibrating loose. Supplied are 4 screws, make sure you use the smallest screw on the hole nearest the front because it's over the barrel sleeve and has a shallower depth.

Visit the Schultz & Larsen Website for more information about the rifles and accessories.
2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Krieghoff Sight Bead Blanking Screw1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff "K" Mesh Cap - Navy1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Krieghoff "K" Denim Cap - Grey1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC ACI Bubble Level [T0940-0000]1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Krieghoff Small Front Sight Bead1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]1 x Contessa Picatinny Rail - Anschutz 54 (20 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (0 MOA)2 x Krieghoff "K" Mesh Cap - Grey2 x Krieghoff "K" Denim Cap - Navy1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Bauer Outdoor 8x21 Binoculars1 x K-80 Stock Weight for Balance System1 x Krieghoff Safety Catch Locking Screw Wrench1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Krieghoff Shell Bag1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Gerber Myth Series Fixed Saw1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)
Manufacturers
Useful Information