VFG Barrel Cleaning Felts for 20 Bore (Box of 25)

VFG Barrel Cleaning Felts for 20 Bore
Code: (66934) 332053

These felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.

The 20 Bore felts are recommended for 20 Bore Shotguns Only

Supplied as small box containing: 25 felt screw-on pellets

Also Available:
Box of 100 Standard Felts
Box of 25 Super Intensive Felts


Instructions for Use:
1. Take Adapter and screw this onto VFG Shotgun Cleaning rod.
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>