Schultz & Larsen Thunderdome Moderator (Over Barrel)

£210.00
20% VAT incl.


  • Model:SL-TD-OB
Schultz & Larsen | Sound Moderator

HARDCORE SERIES - THUNDERDOME (Over Barrel)


Also See Thunderdome (Muzzle Mounted)


Only Available to Purchase through a Gun Shop or RFD

Silencers and Sound Moderators are classed as a firearm and cannot be supplied mail order. Contact your local dealer for UK ordering. We cannot ship any Schultz & Larsen Sound Moderators outside of the UK. (Please contact Schultz & Larsen directly for ordering outside of the UK)
Call Us on 01978 66 00 01 for ordering details.


The Thunderdome is the moderator for those wanting maximum noise reduction and recoil reduction. This big moderator has the capacity to handle the most powerful loads and is especially recommended for taming the big magnums.

Over Barrel
Length: 225mm
Adds to barrel length: 120mm
Diameter: 54mm
Weight: 523 g

Available in:
6mm (.236” max).
7mm (.275” max).
8mm (.315mm max)
9.5mm (.338mm max)
Maximum barrel diameter: 22mm at 100mm from the muzzle

Thread sizes:
Metric: M14x1 / M15x1 / M17x1 / M18x1
Imperial: 1/2” x 20 UNF / 1/2” x 28 UNEF / 5/8” x 24

An additional baffle module is available as an add on to further increase the noise reduction. The module adds 54mm to the length and around 150g to the weight. If you wish to add or remove modules you will need the pair of C-spanners made by Schultz & Larsen for this purpose. Unusually, for a rifle maker at least, Schultz & Larsen have chosen to design and manufacture their own moderators. In doing so they have set the same standards for performance demanded of their rifles.

Each moderator is made of the highest quality materials and designed to withstand repeated firing with heavy calibres. Every baffle has a stainless steel cone in the centre to ensure longevity – hence the designation for this model range – ‘Schultz & Larsen Hardcore’.

The rear section of the over-barrel models is machined from solid bar and that alone is an impressive piece of engineering.

Maintenance
The moderators require minimal cleaning to prevent rusting. The recommended cleaning method is to run a cleaning rod through the moderator periodically. In theory the carbon left behind from usage actually reduces the noise as it slows the gases flowing through the moderator.

Full Range of Schultz & Larsen Sound Moderators:
- TMD 35 (Muzzle Mounted)
- Ultradome (Over Barrel)
- Superdome (Over Barrel)
- Superdome (Muzzle Mounted)
- Thunderdome (Over Barrel)
- Thunderdome (Muzzle Mounted)
- Ultra Venom (Over Barrel)
- Venom (Over Barrel)
- Venom (Muzzle Mounted)

1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Clearance Americase Cordura Case Cover (37x11x3.5")1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x ERATAC M-Lok Picatinny Rail, 9 Slots [T5909-0008]1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Short (101 x Gerber Paraframe II Fine Edge Knife1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x LED Lenser Intelligent Filter Set with Holster1 x Contessa Picatinny Rail - Browning BAR (0 MOA)1 x Recknagel Picatinny Rail Sauer 303, Alu [..041R]1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff "K" Mesh Cap - Grey1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Black Barrel Case (83cm Internal)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Pro Choke Box1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Anschütz Biathlon Harness1 x Bauer HD Series 8x25 Binoculars1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Bauer Outdoor 8x21 Binoculars1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Achievement Badge 100/3001 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Recknagel Picatinny Rail Mauser M18, Steel, 20 MOA [..202X]1 x Krieghoff 2015 Badge (Collectors Badge)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA) - Extended1 x Contessa Picatinny Rail - Anschutz 54 (0 MOA)
Manufacturers
Useful Information