Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set

The Master Set

The Chapman Precision Screwdriver & Midget Ratchet Set
Set Number - #5575
(Metric & SAE)

The Master Set This Chapman Tool Set comprises of a 56 Piece Master Screwdriver Set ncludes Slotted, Phillips, Metric and SAE Hex Bits, and Star bits which fit Torx screws. This set offers 51 insert bits, over 300 tool combinations, and is our second most complete set next to the Mity Master #1000.

- Customizable case has same outside dimensions as the Mity Master Set, inside is more modular/customizable.
- Great for gunsmiths, firearms, weapons, lanterns, sewing machines & fishing reels
- Our slotted bits have straight parallel sides (not tapered like most screwdrivers) for maximum surface contact with the screws
- Each slotted kit includes a spinner to use on small, delicate screws
- We've received many questions about small firearm screws treated with Loctite. Green Loctite threadlocker is supposed to be used on screws smaller than 1/2" not the commonly used red threadlocker.
- Made, hand assembled & inspected in Durham, CT from USA materials.
- We have Spare Bits Available if you do lose or damage one from your set

The Driver Bits:
- Precision milled to tight tolerances with flat edges, sharp corners & no burrs for snug screw fit
- Machined from USA steel & heat treated with a black oxide rust inhibitor finish
- Bits are engineered to bend/break BEFORE damaging the screw they fit
- Each bit has ear/or ring stops with ball detent to hold the bit securely in our tools
- Bits have knurled ends for finger tightening & are stamped with the part #
- Non-magnetic for use on electronics & PC boards

Contents:

- 12 x Slotted Bits (Blade Width x Thickness) -- #88 .125" x .023" -- #89 .160" x .030" -- #90 .190" x .025" -- #25 .190" x .037" -- #26 .230" x .037" -- #93 .250" x .025" -- #17 .250" x .023" -- #95 .328" x .030" -- #96 .328" x .037" -- #97 .375" x .025" -- #98 .375" x .037" -- #19 .375" x .050" - 12 x Hex Bits (Metric) -- #40 1.5mm -- #41 2.0mm -- #42 2.5mm -- #43 3.0mm -- #44 4.0mm -- # 4.5mm -- #45 5.0mm -- # 5.5mm -- #46 6.0mm -- #47 7.0mm -- #48 8.0mm - 12 x Hex Bits (SAE) -- #3 0.50" -- #4 1/16" -- #5 5/64" -- #6 3/32" -- #7 7/64" -- #8 1/8" -- #9 9/64" -- #10 5/32" -- #12 3/16" -- #12 7/32" -- # 1/4" -- # 5/16""

- 4 x Phillips Bits -- #P1 #1 Phillips -- #P2 #2 Phillips -- #P3 #3 Phillips -- #P4 #4 Phillips - 3 x Robertson Bits -- #61 #1 Rob -- #62 #2 Rob -- #63 #3 Rob - 7 x Torx (Star) Bits -- #S6 -- #S8 -- #S10 -- #S15 -- #S20 -- #S25 -- #S30 - 1 x Driver Handle - 1 x Midget Ratchet Handle - 2 x Driver/Ratchet Extension - 1 x Spinner Attachment - 1 x Socket Adaptor - 1 x Plastic Hard Case