Pin Punches (1.4mm/0.9mm)

£14.00
20% VAT incl.

Available Options

  • Model:PUNCHES
Front hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the centre of the hollow cross pin to provide support whilst it is replaced.

The pin punch is used to drive objects using a soft hammer, with care taken not to damage your equipment when using.

You may also require a spare Krieghoff Hanger Pin.

The Pin Punches are Available in:
- Set of 2 (both 1.4mm & 0.9mm) - £11.90
- 1.4mm Only - £5.95
- 0.9mm Only - £5.95



You might also like...

1 x EX Demo - Gerber Metolius Pocket Folder1 x Schmierfix Grease by Liqui Moly2 x Anschütz Biathlon Harness1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Krieghoff Pro Choke Box1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Black Barrel Case (83cm Internal)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff "K" Mesh Cap - Navy1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Bauer ED 8x42 Binoculars1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Picatinny Rail Remington 700 S, Steel [..0012]1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Bear Grylls Paracord Fixed Blade1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa CZ 527 Euro Rail for Quick Release Mount
Manufacturers
Useful Information