Pin Punches (1.4mm/0.9mm)

£14.00
20% VAT incl.

Available Options

  • Model:PUNCHES
Front hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the centre of the hollow cross pin to provide support whilst it is replaced.

The pin punch is used to drive objects using a soft hammer, with care taken not to damage your equipment when using.

You may also require a spare Krieghoff Hanger Pin.

The Pin Punches are Available in:
- Set of 2 (both 1.4mm & 0.9mm) - £11.90
- 1.4mm Only - £5.95
- 0.9mm Only - £5.95



You might also like...

1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff Steel Middle Hanger (For Parcours)2 x K-80 Stock Weight for Balance System1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Bauer Outdoor 8x21 Binoculars1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Krieghoff "K" Denim Cap - Grey1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff "K" Beanie - Heather Navy1 x Krieghoff Shell Bag1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Black Barrel Case (83cm Internal)1 x Krieghoff 2009 Badge (Collectors Badge)1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Shooter's Towel - Navy1 x Krieghoff "K" Logo Cap Black & White1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Precision Fit Stock Aligner Bracket1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Krieghoff "K" Bobble Beanie - Navy1 x K-80 Forward Position Trigger - Steel1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Krieghoff Shooter's Towel - Black1 x Krieghoff "K" Mesh Cap - Grey1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]
Manufacturers
Useful Information