Schultz & Larsen Picatinny Rail for Browning X-Bolt Long (0 MOA)

£100.00
20% VAT incl.


  • Model:SLBXL00
Schultz & Larsen Picatinny Rail
Fits Browning X-Bolt Long (0 MOA)


Machined out of aluminium and anodised for strength with scratch proof coating. Incredibly strong and rust proof, due to the special hardening process. A very low construction of only 7mm with strengthening bar running centrally on the underside of the rail. This rail is precision made and very high quality, designed to fit the Browning X-Bolt Long rifle only.

Clearly indicated which rifle it fits on the top and inclination of MOA on the underneath if applicable. Always mount it with rifle name of the rifle at the back nearest the bolt.

Hole Spacing (from front to rear)
Holes 1-2: 17.8mm
Holes 2-3: 93.8mm
Holes 3-4: 17.8mm

Weight - 45g
Length - 155mm
Base Height (BH) - 7mm
Code Ref: SLBXL00

The torx screws for fitting are included. For best results use Locktite Thread locker to stop screws vibrating loose. Supplied are 8 screws.

Visit the following Scope Mounting Information for help getting the correct height when mounting your scope.
1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Pull Through Pocket Set for .22 Upwards1 x Schultz & Larsen Torx Key for Scope Mounts1 x Genuine Sack-Ups - Rifle/Shotgun Sack1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff K-80 Sport Logo Cap Grey & White1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff "K" Mesh Cap - Grey1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Krieghoff Achievement Badge 100/3001 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Gerber Basic Fixed Blade Serrated1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Black Barrel Case (83cm Internal)1 x Krieghoff 2009 Badge (Collectors Badge)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Gerber Myth Series Fixed Saw1 x K-80 Stock Weight for Balance System1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Ex-Display Gerber GDC Zip Hex
Manufacturers
Useful Information