Contessa Quick Release Mount (Picatinny) for ATN X-Sight II

£306.00
20% VAT incl.


  • Model:SBP12
Contessa Quick Release Mount (Picatinny) for ATN X-Sight II Night Vision.
Designed to fit Picatinny Rails.
Quick Release & Attach / Guaranteed Zero

To use with the ATN X-Sight II / Mars HD / Thor HD.

(Please note: This mount is too low for the ATN Scopes with 100mm Objective Lens, it does not give enough clearance and the scope interferes with the mount. We can suggest the Rear Extended Picatinny Mount as an alternative)

This Quick Release Rail is made by Contessa Alessandro & C. s.n.c. The parts are precision made in Italy. The Contessa Quick Release Rails will attach to picatinny rails. So as long as you have a picatinny rail mounted to your rifle, this mount will fit.

Total Length: - 190mm
Height (BH) of Rail - 15mm
Extension Rearwards - 110mm from rear picatinny slot
Weight: - 233g
Code: - SBP12
Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

Contents Supplied:
- 1x Quick Release Mount for ATN to fit Picatinny Rail,
- Wrenches for adjustment/fitting

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Quick Release Mounts Here.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x K-80 Standard Trigger - Black Titanium1 x Anschütz Biathlon Harness1 x Bauer Outdoor 10x25 Binoculars2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]2 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Krieghoff Pro Choke Box1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Black Barrel Case (83cm Internal)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x K-80 Stock Weight for Balance System1 x Bauer HD Series 8x25 Binoculars1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Bauer Outdoor 8x21 Binoculars1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff "K" Mesh Cap - Navy1 x ERATAC Bubble Level [T0940-0002]1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Shooter's Towel - Navy1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)
Manufacturers
Useful Information