Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Recknagel Weaver Bases - Krico 600/700/900/902 [.3006]1 x Krieghoff Shell Bag1 x Bauer Outdoor 10x25 Binoculars2 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)2 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Comb Wrench (T-Handle)1 x Jones Thru-the-Pad Adjuster1 x Krieghoff "K" Logo Cap Grey & White1 x Schmierfix Grease by Liqui Moly1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]2 x Krieghoff "K" Mesh Cap - Grey1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff Factory Hanger Pin1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Krieghoff "K" Beanie - Heather Navy1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Krieghoff Shooter's Towel - Red1 x Krieghoff Classic "Big Five" Badge1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x K-80 Standard Trigger - Black Titanium1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Schultz & Larsen Torx Key for Scope Mounts1 x WalkStool Set of Spare Red Spring1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x WalkStool Spare Leg Joints1 x Hi Viz - How to Become a Better Shooter1 x Krieghoff "K" Mesh Cap - Black1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff "K" Denim Cap - Navy1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x Krieghoff Trigger & Selector Locking Wrench1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Krieghoff Stock Removal Wrench1 x Krieghoff Brass Mid Sight Bead1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Starkie Blue (A.K.A Smurf Poo)1 x Walkstool Steady1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)
Manufacturers
Useful Information