Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Recknagel Picatinny Rail Remington 700 S, Steel [..0012]1 x Contessa Picatinny Rail - Remington 700 Short (20 MOA)2 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]2 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff Pro Choke Box1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Black Barrel Case (83cm Internal)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Schultz & Larsen Professional Bipod by Spartan1 x Used Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]2 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Ex-Demo K-80 Steel 12b Hanger #82 x Krieghoff "K" Mesh Cap - Grey1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Krieghoff Comb Wrench (T-Handle)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bear Grylls Ultimate Pack with Multi-Tool1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Krieghoff "K" Denim Cap - Grey1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff "K" Mesh Cap - Navy1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Krieghoff K-80 Sport Logo Cap Grey & White1 x K-80 Stock Weight for Balance System1 x Bauer HD Series 8x25 Binoculars1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Krieghoff Premium ABS Case (K-80/K-20)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x K-80 Standard Trigger - Black Titanium1 x Krieghoff Shooter's Towel - Navy1 x Krieghoff "K" Logo Cap Black & White1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Krieghoff "K" Beanie - Heather Navy1 x Krieghoff Shooter's Towel - Red1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Krieghoff Factory Hanger Pin1 x Contessa Spare Ring-to-Base Screws1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]
Manufacturers
Useful Information