Contessa QD Rear Extended Picatinny Rail Mount for Blaser

£342.00
20% VAT incl.


  • Model:SBB03/R
Contessa Rear Extended Picatinny Rail for Blaser
Quick Release (QD) Rail Mount including Rear Picatinny Rail for Blaser


Rail Length: 190mm
Height without Rail (BH): 12.5mm
Height with Rail (BH): 19.5mm
Extends Backwards - 98mm Back past the rear rifle clamp notch
Weight: 282g
Fits Models: R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 1 x Forward Extended Picatinny Rail (EBB02-REAR)
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

This quick release mount is an extended Picatinny Rail, suitable for night vision, allowing greater flexibility in eye relief position. This mount is supplied with a quick release base with ONLY THE REAR EXTENDED RAIL, that extends backwards towards the eye. Simple single release lever and high quality with guaranteed return to zero.

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Rings,
Contessa Quick Release Mount for Blaser with Forward Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Bauer Outdoor 10x25 Binoculars1 x Anschütz Biathlon Harness1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x K-80 Stock Weight for Balance System1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Black Barrel Case (83cm Internal)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]2 x Krieghoff Sight Bead Blanking Screw1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Bauer Outdoor 8x21 Binoculars1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff "K" Logo Cap Grey & White1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff "K" Denim Cap - Grey1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Krieghoff 2009 Badge (Collectors Badge)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Krieghoff Safety Catch Locking Screw Wrench1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff "K" Denim Cap - Navy1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Schultz & Larsen Professional Bipod by Spartan1 x Jones Thru-the-Pad Adjuster1 x Gerber Myth Series Field Sharpener1 x Garant TORX Screwdriver TORX15 (15 x 80)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Schmierfix Grease by Liqui Moly2 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel Picatinny Rail Mauser M18, Steel, 20 MOA [..202X]1 x Krieghoff Premium ABS Case (K-80/K-20)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Achievement Badge 100/3001 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Krieghoff 2015 Badge (Collectors Badge)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Bauer HD Series 8x25 Binoculars1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Krieghoff Pro Choke Box
Manufacturers
Useful Information