Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£66.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Pro Choke Box1 x Krieghoff Shooter's Towel - Red1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff "K" Logo Cap Navy & Red1 x Krieghoff Trigger & Selector Locking Wrench1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Schultz & Larsen T-Handle Wrench (Torx 20)2 x Krieghoff Shell Bag1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Gerber GDC Zip Blade1 x K-80 Stock Weight for Balance System1 x Gerber Myth Series Fixed Saw1 x Anschütz Biathlon Harness1 x Ex-Display Gerber GDC Zip Hex1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (011)1 x Krieghoff Factory Hanger Pin1 x Bauer Outdoor 10x25 Binoculars1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Bauer Outdoor 8x21 Binoculars1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Bauer HD Series 8x25 Binoculars1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff 2009 Badge (Collectors Badge)1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Krieghoff Achievement Badge 100/3001 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Clearance Krieghoff Classic Rifle Americase (With Cover)
Manufacturers
Useful Information