Contessa QD Ring Mount for Blaser R8/R93

£342.00
20% VAT incl.

Available Options

  • Model:SBB00+RINGS
Contessa Quick Release Ring Mount for Blaser

Rail Length - 137mm
Height (BH) - 12.5mm (This scope height with Contessa Low Rings measure the same as the Blaser mount with the low rings)
Distance Between Rings - 80mm or 65mm
Weight - 221g
Fits Models: - R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 2 x Rings of your Choice
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

The quick release ring mount, available with 25.4mm, 30mm, 34mm or 36mm rings and three heights, low, medium or high. The scope height with the low ring is identical to the Blaser mount with the low ring. The Contessa mount has windage adjustment if required and is locked/released with a single side lever that works on both lugs at the same time. The quality and finish of the mount is extremely high. Return to zero is guaranteed.

The Rings have two positions. The maximum position allows a distance of 80mm between the rings, whereas the minimum is 65mm.

Ring Options:
- 1 Inch (25.4mm), Low, 2.5mm (15mm Total BH)
- 1 Inch (25.4mm), Medium, 5.0mm (17.5mm Total BH)
- 1 Inch (25.4mm), High, 7.5mm (20mm Total BH)
- 30mm, Low, 2.5mm (15mm Total BH)
- 30mm, Medium, 5.0mm (17.5mm Total BH)
- 30mm, High, 7.5mm (20mm Total BH)
- 34mm, Medium, 6.5mm (19mm Total BH)
- 34mm, High, 8.0mm (20.5mm Total BH)
- 36mm, Medium, 5.0mm (17.5mm Total BH)
- 40mm, Medium, 6.0mm (18.5mm Total BH)

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in a matter of seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Anschütz Biathlon Harness1 x Krieghoff Pro Choke Box1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Gerber Myth Series Fixed Saw1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x K-80 Forward Position Trigger - Steel1 x Krieghoff "K" Beanie - Oatmeal1 x Ex-Display Gerber GDC Zip Hex1 x Krieghoff "K" Logo Cap Navy & White1 x Krieghoff Achievement Badge 25 Straight1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Krieghoff "K" Beanie - Heather Navy1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Krieghoff "K" Bobble Beanie - Black1 x Krieghoff 2013 Badge (Collectors Badge)1 x Krieghoff 12b Choke Wrench1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Black Barrel Case (83cm Internal)2 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff "K" Mesh Cap - Grey2 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Genuine Sack-Ups - Rifle/Shotgun Sack1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Ex-Demo K-80 Steel 12b Hanger #82 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Krieghoff Sight Bead Blanking Screw1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer Outdoor 8x21 Binoculars1 x K-80 Stock Weight for Balance System1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff Factory Hanger Pin1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff "K" Logo Cap Grey & White1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Gerber Gator Combo Replacement Saw1 x Krieghoff "K" Logo Cap Red & White1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff "K" Mesh Cap - Black1 x Gerber Dime Multi-Tool (Lime)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Gerber GDC Hook Knife1 x Starkie Blue (A.K.A Smurf Poo)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Gerber Paraframe I Fine Edge Knife1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Krieghoff "K" Bobble Beanie - Burgundy1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Krieghoff Shooter's Towel - Black1 x Recknagel Picatinny Rail Sauer 100/101 Old, Alu [..002K]1 x Krieghoff Shooter's Towel - Red1 x Krieghoff E-Clips1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x Gerber New Myth Series Pocket Folder1 x Gerber Steady Tool (Phone Tripod)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Schmierfix Grease by Liqui Moly1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)
Manufacturers
Useful Information