Pin Punches (1.4mm/0.9mm)

£14.00
20% VAT incl.

Available Options

  • Model:PUNCHES
Front hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the centre of the hollow cross pin to provide support whilst it is replaced.

The pin punch is used to drive objects using a soft hammer, with care taken not to damage your equipment when using.

You may also require a spare Krieghoff Hanger Pin.

The Pin Punches are Available in:
- Set of 2 (both 1.4mm & 0.9mm) - £11.90
- 1.4mm Only - £5.95
- 0.9mm Only - £5.95



You might also like...

1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Used Recknagel Picatinny Rail Sauer 100/101 Old, Steel [..002K]1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff "K" Mesh Cap - Grey1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Krieghoff Shell Bag1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff "K" Denim Cap - Navy1 x Bauer Outdoor 10x25 Binoculars1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Denim Cap - Grey1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Krieghoff "K" Mesh Cap - Navy1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Bauer Outdoor 8x21 Binoculars1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x K-80 Stock Weight for Balance System1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Krieghoff Pro Choke Box1 x Black Barrel Case (83cm Internal)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Schultz & Larsen Professional Bipod by Spartan1 x Bauer HD Series 8x25 Binoculars1 x Anschütz Biathlon Harness1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Jones Thru-the-Pad Adjuster1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Krieghoff "K" Beanie - Heather Navy1 x Krieghoff Comb Wrench (T-Handle)
Manufacturers
Useful Information