Contessa QD Ring Mount for Blaser R8/R93

£342.00
20% VAT incl.

Available Options

  • Model:SBB00+RINGS
Contessa Quick Release Ring Mount for Blaser

Rail Length - 137mm
Height (BH) - 12.5mm (This scope height with Contessa Low Rings measure the same as the Blaser mount with the low rings)
Distance Between Rings - 80mm or 65mm
Weight - 221g
Fits Models: - R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 2 x Rings of your Choice
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

The quick release ring mount, available with 25.4mm, 30mm, 34mm or 36mm rings and three heights, low, medium or high. The scope height with the low ring is identical to the Blaser mount with the low ring. The Contessa mount has windage adjustment if required and is locked/released with a single side lever that works on both lugs at the same time. The quality and finish of the mount is extremely high. Return to zero is guaranteed.

The Rings have two positions. The maximum position allows a distance of 80mm between the rings, whereas the minimum is 65mm.

Ring Options:
- 1 Inch (25.4mm), Low, 2.5mm (15mm Total BH)
- 1 Inch (25.4mm), Medium, 5.0mm (17.5mm Total BH)
- 1 Inch (25.4mm), High, 7.5mm (20mm Total BH)
- 30mm, Low, 2.5mm (15mm Total BH)
- 30mm, Medium, 5.0mm (17.5mm Total BH)
- 30mm, High, 7.5mm (20mm Total BH)
- 34mm, Medium, 6.5mm (19mm Total BH)
- 34mm, High, 8.0mm (20.5mm Total BH)
- 36mm, Medium, 5.0mm (17.5mm Total BH)
- 40mm, Medium, 6.0mm (18.5mm Total BH)

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in a matter of seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

2 x Gerber GDC Zip Blade1 x Gerber Myth Series Field Sharpener1 x Gerber Metolius Pocket Folder1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Chapman Precision Screwdriver Set 9800, 28 Piece (Metric)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm2 x Ex-Display Gerber GDC Zip Hex1 x Anschütz Biathlon Harness1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Krieghoff 2015 Badge (Collectors Badge)1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Krieghoff Achievement Badge 100/3001 x Krieghoff Pro Choke Box1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff 2009 Badge (Collectors Badge)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Bauer Outdoor 8x21 Binoculars1 x K-80 Stock Weight for Balance System1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Krieghoff Shooter's Towel - Navy1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff Factory Hanger Pin1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Silva ex10 Distance Pedometer - White1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Gerber Myth Series Fixed Saw1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff "K" Mesh Cap - Navy1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Sight Bead Blanking Screw1 x Gerber Dime Multi-Tool (Lime)1 x Gerber Balance Multi-Tool Black1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Krieghoff E-Clips1 x Krieghoff Shooter's Towel - Black1 x Recknagel Picatinny Rail Sauer 100/101 Old, Alu [..002K]1 x Krieghoff Shooter's Towel - Red1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff 2013 Badge (Collectors Badge)1 x Krieghoff Classic "Big Five" Badge1 x Gerber Steady Tool (Phone Tripod)1 x K-80 Standard Trigger - Titanium1 x Krieghoff Front Sight Bead1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Krieghoff Stock Removal Wrench1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff "K" Mesh Cap - Grey1 x Precision Fit Stock Additional Comb
Right-Handed
1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x WalkStool Comfort 65 (65cm/26in)
Manufacturers
Useful Information