Pin Punches (1.4mm/0.9mm)

£14.00
20% VAT incl.

Available Options

  • Model:PUNCHES
Front hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the centre of the hollow cross pin to provide support whilst it is replaced.

The pin punch is used to drive objects using a soft hammer, with care taken not to damage your equipment when using.

You may also require a spare Krieghoff Hanger Pin.

The Pin Punches are Available in:
- Set of 2 (both 1.4mm & 0.9mm) - £11.90
- 1.4mm Only - £5.95
- 0.9mm Only - £5.95



You might also like...

1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Krieghoff "K" Mesh Cap - Navy1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff "K" Mesh Cap - Grey1 x Krieghoff "K" Denim Cap - Navy1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff Premium ABS Case (K-80/K-20)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Black Barrel Case (83cm Internal)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Schultz & Larsen 3-Shot Magazine, Short (Marked)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Used Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x Anschütz Biathlon Harness1 x Gerber GDC Zip Blade
Manufacturers
Useful Information