Krieghoff Titanium Hanger, Choke Tube Barrels

Titanium Front hanger for your K-80 with Choke Tube Barrels. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the titanium choke tubes the difference in handling is noticeable. Available in sizes #1, #2, #3, #4, #5 and #6 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

A pair of suitably sized pin punches are available in this store.

Weight of Titanium Hanger: 6 g
(Compared to Steel Hanger weight of 12 g)

Height Sizes Available:
#1 = 0,5 mm - [Code Ref: ZTL001828]
#2 = 1,0 mm - [Code Ref: ZTL001826]
#3 = 1,5 mm - [Code Ref: ZTL001822]
#4 = 2,0 mm - [Code Ref: ZTL001823]
#5 = 2,5 mm - [Code Ref: ZTL001824]
#6 = 3,0 mm - [Code Ref: ZTL001827]

We Can Only Accept Orders from UK & Ireland Only Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.