Precision Fit Stock Complete for Krieghoff K-80 (RH & LH)

£1,450.00
20% VAT incl.

Available Options

  • Model:PFS-KRIEG-RH
Complete Stock for Krieghoff K-80,
K-32 and Signature LW

Available in Right and Left Hand Grips. The full PFS comes complete with the PFS Tool Kit, to allow you to adjust and alter each part of the stock yourself.

New Configuration Available: The new Low Comb Version is available with all Precision Fit Stock Units now. The Low Comb allows you to achieve a lower head position on your gun, with the same amount of custom positioning and adjustability you get with the standard comb.

Features:

Adjustability:
- Length of Pull from 13" to 16"
- Comb Adjustment to accommodate a wide range of facial requirements
- Comb Height Adjustment
- Up or Down for setting your correct point of impact
- Comb lateral adjustment (Off-set)
- Left or Right to Center your eye on the rib line for proper alignment
- Comb rotation adjustment
- Get just the right feel on your face
- Comb tilt adjustment
- Low in Front, High in Back or Parallel with rib
- Comb can be moved forward or back
- To be centered on your face

Adjustable butt plate:
- Side to side adjustment
- To fit your shoulder pocket
- Cast on or cast off adjustment
- Up or down heel and toe adjustment
- Set up a Monte Carlo or straight stock
- For long neck or short neck persons
- Kick EEZ Recoil Pad

Unsurpassed felt recoil reduction:
- Reduction of 50% or greater.
- Can be adjusted to your specific style of shooting
- Unsurpassed comfort
- New Addition: The PFS units now come complete with the Aligner Bracket, which makes the stock unit that little bit more rigid.

The stock can be weighted to individual requirements and a detachable weight is included with each stock. Without any weights attached the stock weighs 1175g, the weight adds another 115g making the total weight 1290g which can be customised by shortening the bar to any weight in between. If 1290g is not heavy enough it would be a simple matter to make up a heavier weight.



You might also like...

1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Picatinny Rail CZ 550 Standard, Alu [..0062]1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x Recknagel Zeiss Rail 70º Components for Optilock Base - 4mm BH2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Quick Release Picatinny Rail1 x Schultz & Larsen Torx Key for Scope Mounts1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Chapman Precision Screwdriver Set 8900, 28 Piece (SAE)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Krieghoff Brass Mid Sight Bead1 x Recknagel Adaptor for Thermal and Night Vision Devices - 56mm1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Krieghoff Front Sight Bead1 x Recknagel Screw M3.5 x 3.8 x 5 [..0380]1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA) Extended1 x Jones Gun Nut Kit1 x Krieghoff 28b Choke Wrench1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x AimZonic Plus Camo Sound Moderator1 x Contessa Quick Release Mount for Zeiss Rail1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Krieghoff Trigger & Selector Locking Wrench1 x Used Sako P94S, Wooden Stock (.22 LR)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Krieghoff Pro Choke Box1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Schmierfix Grease by Liqui Moly1 x Used Precision Fit Stock Spare Grip for Krieghoff K-80, Right-Hand (03)1 x Gerber Metolius Pocket Folder1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Krieghoff .410g Choke Wrench1 x Recknagel Super Express 1 Leaf Sight [15400-3025]1 x Ex-Display Recknagel Picatinny Rail Krico, Alu [..0006]1 x Krieghoff Extended Pillars for Adjustable Comb1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Contessa Quick Release Mount for Swarovski Rail1 x Used Precision Fit Stock Spare Grip for Perazzi MX, Left-Hand (13)1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Teague Precision Choke Key1 x Used Precision Fit Stock Spare Grip for Krieghoff K-80, Right-Hand (08)1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Krieghoff Safety Catch Locking Screw Wrench1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Precision Fit Stock Back Plate1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Used Precision Fit Stock Spare Grip for Blaser F3, Left-Hand (01)1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)1 x Krieghoff "K" Mesh Cap - Black1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Used Precision Fit Stock Spare Grip for Krieghoff K-80, Right-Hand (11)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Used Precision Fit Stock Spare Grip for Krieghoff K-80, Right-Hand (06)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x MSA Sordin - Hygiene Kit - Gel Ear Seals1 x Precision Fit Stock Aligner Bracket1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel Front Sight Bead Red [11444-0300]
Manufacturers
Useful Information